Mild Steel MS Pipe IS 3589
Mild Steel MS Pipe IS 3589 refers to carbon steel pipes manufactured and supplied according to IS 3589:2001 – Steel Pipes for Water and Sewage (168.3 to 2540 mm Outside Diameter) – Specification. The standard covers steel pipes intended primarily for water and sewage applications and includes requirements relating to materials, dimensions, mechanical properties, manufacturing, testing, and inspection.
IS 3589 pipes can be manufactured using approved processes including Electric Resistance Welding (ERW) and Submerged Arc Welding (SAW), depending on the specified pipe type and manufacturing requirements. BIS documentation identifies ERW and SAW as methods of manufacture within the certification scope for IS 3589.
For procurement, the complete requirement should specify the applicable IS standard, steel grade, outside diameter, wall thickness, manufacturing method, testing, coating, and documentation.
What Is an IS 3589 Pipe?
An IS 3589 Pipe is a steel pipe manufactured according to IS 3589:2001 for water and sewage applications.
The standard covers pipes with outside diameters from 168.3 mm to 2540 mm. BIS currently lists IS 3589:2001 under its product-specific guidelines for steel pipes for water and sewage.
The standard addresses requirements including:
- Steel material
- Pipe manufacturing
- Chemical composition
- Mechanical properties
- Dimensions
- Tolerances
- Workmanship
- Testing
- Inspection
- Marking
- Protective coating where specified
It is therefore more accurate to refer to these products as steel pipes conforming to IS 3589 rather than treating "IS 3589" as a standalone steel grade.
Key Features of IS 3589 Pipe
Important characteristics include:
- Designed for water and sewage pipe applications covered by the standard
- Large outside-diameter range
- Availability in welded pipe construction
- ERW manufacturing option where applicable
- SAW manufacturing option where applicable
- Defined dimensional requirements
- Defined mechanical requirements
- Material testing requirements
- Hydraulic testing or NDT as applicable
- Marking and traceability requirements
- Protective coating options where specified
BIS documentation states that IS 3589 conformity covers steel grades, OD/thickness, pipe ends, and optional protective coating such as galvanizing within the relevant certification scope.
Applications of IS 3589 Pipes
IS 3589 is specifically associated with steel pipes for water and sewage applications.
Typical applications can include:
Water Transmission
- Water transmission pipelines
- Municipal water systems
- Raw water pipelines
- Industrial water systems
- Water treatment infrastructure
Sewage Systems
- Sewage pipelines
- Wastewater transmission
- Municipal sewage infrastructure
- Industrial wastewater systems
Infrastructure Projects
- Municipal infrastructure
- Water distribution projects
- Treatment plants
- Large-diameter pipeline systems
The actual suitability depends on design pressure, fluid characteristics, installation conditions, corrosion protection, and project specifications.
Quality Control for MS Pipe IS 3589
A reliable quality-control process should include:
- Raw material verification
- Grade verification
- Chemical analysis
- Manufacturing-process control
- Weld inspection
- Dimensional inspection
- Mechanical testing
- Hydraulic/NDT testing as applicable
- Surface inspection
- Coating inspection where specified
- Heat/lot traceability
- Final documentation
Material Traceability
Traceability is particularly important for project-based procurement.
Relevant records may include:
- Heat number
- Batch/lot identification
- Material Test Certificate
- Chemical test results
- Mechanical test results
- Inspection reports
- NDT reports
- Hydrostatic test records
- Coating records
How to Select MS Pipe IS 3589
Before ordering, confirm:
-
Application
Identify whether the pipe is for:- Water transmission
- Sewage
- Wastewater
- Treatment plant
- Industrial water
- Municipal infrastructure
- Diameter
Specify the required outside diameter. - Wall Thickness
Specify the required thickness based on design calculations and applicable requirements. - Grade
Specify the required IS 3589 grade. -
Manufacturing Method
Specify whether the project requires:- ERW
- SAW
- Another permitted construction
-
Testing
Confirm requirements for:- Chemical testing
- Mechanical testing
- Hydraulic testing
- NDT
- Dimensional inspection
- Coating
Specify the required internal/external corrosion protection. -
Documentation
Confirm:- MTC
- Inspection reports
- Test reports
- Traceability records
- Coating documentation
- BIS certification/marking where required
Why Consider Spark Steel?
For IS 3589 pipe procurement, Spark Steel can focus on matching the requested pipe with the customer's technical specification.
The procurement process can consider:
- Correct IS standard
- Grade verification
- OD and thickness
- Manufacturing method
- Testing requirements
- Inspection requirements
- Coating requirements
- Material traceability
- Documentation
- Project delivery requirements
This approach helps reduce the risk of purchasing a pipe that does not match the project's specified standard.
Frequently Asked Questions About IS 3589 Pipe
Ready to place an order?
We supply premium quality steel products for every industrial application. Call us or send an enquiry and our team will respond within 24 hours.
